Gasket and Seal Jet sealing systems

in the chamber for non-metallic seals it is possible to make them in the surface of 4000x2000 mm
metal gaskets, ie materials containing metal, eg reinforced klingerite, can be made in the size 3000x2200 mm, and sizes larger than that are made in several parts
the draft of the made gasket can be stored in the computer memory and recreated

Plate materials:

tight, klingerite, teflon, rubber, cork, plastic, paper, felt, polyamide, styrofoam, cardboard, wood, plexiglass, carpet, fabric, vinyl, leather, fiberglass
metal up to 40 mm thick is cut using quartz sand

designing with the support of a computer system as part of the equipment
the shape and complexity of the seal can be taken directly from the design or according to the pattern
seals are cut with water jet with a maximum pressure of 4000 bar and a speed equal to almost three times the speed of sound
the water jet that cuts the sealing material is only slightly thicker than human hair
the edges are clean and smooth
high speed of workmanship without preliminary mold preparation ("punches")

a very wide range of materials, shapes and dimensions for flat seals for all sealing applications
possible corrections (increase / decrease) eg screw holes or bolts
possible changes in angle and cutting at given tolerances
application at temperatures from -200 ° C to +260 ° C

Production of gaskets from 5 to 440 mm in diameter for all media in hydraulic and pneumatic systems.

more than 150 pre-programmed profiles
5 to 440 mm diameter gaskets are produced for all media in hydraulic and pneumatic systems
In addition to the own production Seal Jet gaskets for the Croatia market we also work with the company "SIMRIT FREUDENBERG" from Weinheim is forand the company "Merkel" from Hamburg.
Large assortment in "Simrit" gaskets and oil seals is constantly stored, non-standard and specific customer needs are met very quickly thanks to extremely short delivery times
See the gasket profile HERE.

17 standard media types depending on the media to be sealed.

preparation and production of gaskets is performed on the modern electronic equipment of the manufacturer "ECONOMOS" generation "NG 40")
sealing in pressures from 0 to 700 bar for all media in hydraulics and pneumatics
application at temperatures from -200 ° C to +260 ° C
rapid production and delivery according to the default profile enables practical use for the services of construction machinery, transport equipment, agricultural machinery, mechanical engineering, etc.

A very wide range of sealant materials, shapes and dimensions for all types of sealants
Possible corrections (increase / decrease) i. E. From holes for screws or bolts
It is possible to change the angles and cutting edges with certain tolerances
Application at temperatures from -200 ° C to +260 ° C